[:it]Prana SW 200 Power Amplifier, 0.8 GHz – 4 GHz, 200W[:]

[:it]

• Frequency bandwidth : 0.8 GHz – 4 GHz
• Typical output power : 200 W
• Power at 3 dB compression : 180 W min. up to 3 GHz / 160 W min. from 3 GHz to 4 GHz *
• Power at 1 dB compression : 140 W min. up to 3 GHz / 120 W min. from 3 GHz to 4 GHz *
• Harmonics distortion : H2,H3 < -20 dBc for the output power at 1 dB compression limit
• Class type : Class A
• Gain : 54 dB
• Linear power gain flatness : ± 5 dB max
• Mismatch tolerance : infinite without damage
• Input impedance : 50 ohms / VSWR: 2:1max
• Output impedance : 50 ohms / VSWR: 2:1max
• Input power : +10 dBm max.
• RF input connector : Type N fem. (front or rear panel) – other connector type on request
• RF output connector : Type N fem. (front or rear panel) – other connector type on request
• Safety interlock : Connector type BNC
• Digital control : Transistors, power supplies and internal temperature
• Communication interface : IEEE 488
• 4 lines digital display : Status, faults, (direct and reverse instantaneous power for DC version)
• Ambient operating temperature : 0 °C / + 35 °C
• Room temperature storage : -20 °C / +70 °C
• Cooling : Forced air: 120 l/sec max. (self contained fans)
• Power voltage : 200-250 VAC, 47-63 Hz, single phase
• Rated current : 8.5 A at 230 VAC
• Dimensions : 640 x 450 x 312 mm (7U) / 25.2 x 17.7 x 12.3 in (7U)
• Weight : 45 kg / 99 lb

SW 200 DC version :

• Integrated bidirectional power coupler : Coupling factor 59 dB typ.
• Power coupling connector : Type N fem. (rear panel)
• Estimated output power losses due to the coupler : 0.4 dB * => take account these power losses for the min output power

[:]