Prana SX 120/30 Amplificatore di Potenza, 0.8 GHz – 6 GHz, 120 W CW – 30W


  • Class A solid state
  • Broadband (instantaneous dual band): 0.8 GHz – 6 GHz
  • Typical output power :
    • 120 W CW (0.8 – 3.2 GHz) and
    • 30 W CW (3.2 – 6 GHz)
  • Linear output power (1 dB compression) guaranted with harmonics <-20 dBc:
    • P1dB > 75 W and H < -20 dBc up to 3.2 GHz and
    • P1dB > 17 W and H < -20 dBc from 3.2 GHz to 6 GHz
  • Air cooling: self contained fans
  • Can operate in full mismatch conditions without damage
  • Upgradable to SX120/55 or SX220/30 or SX220/55
  • Reliable, efficient and robust
  • 19″ Rack
  • 3 years standard warranty

Prana SX 120/30 Amplificatore di Potenza
Prana SX 120/30 Amplificatore di Potenza DatasheetPrana SX 120/30 Amplificatore di Potenza Datasheet Inglese
Richiedi Informazioni
  • Frequency bandwidth : 0.8 GHz – 6 GHz
  • Typical output power : 120 W / 30 W
  • Power at 3 dB compression : 100 W min. up to 3.2 GHz / 25 W min. up to 6 GHz *
  • Power at 1 dB compression : 75 W min. up to 3.2 GHz / 17 W min. up to 6 GHz *
  • Harmonics distortion : H2,H3 < -20 dBc for the output power at 1 dB compression limit
  • Class type : Class A
  • Gain : 50 dB
  • Linear power gain flatness : ± 5 dB max
  • Mismatch tolerance : infinite without damage
  • Input impedance : 50 ohms / VSWR: 2:1max
  • Output impedance : 50 ohms / VSWR: 2:1max
  • Input power : +10 dBm max.
  • RF input connector : Type N fem. (front or rear panel) – other connector type on request
  • RF output connector : Type N fem. (front or rear panel) – other connector type on request
  • Safety interlock : Connector type BNC
  • Digital control : Transistors, power supplies and internal temperature
  • Communication interface : IEEE 488
  • 4 lines digital display : Status, faults, (direct and reverse instantaneous power for DC version)
  • Ambient operating temperature : 0 °C / + 35 °C
  • Room temperature storage : -20 °C / +70 °C
  • Cooling : Forced air: 240 l/sec max. (self contained fans)
  • Power voltage : 200-250 VAC, 47-63 Hz, single phase
  • Rated current : 6.4 A at 230 VAC
  • Dimensions : 600 x 840 x 1050 mm (18U) / 23.6 x 33.1 x 41.3 in (18U)
  • Weight : 145 kg / 319 lb
SX 120/30 DC version :
  • Integrated bidirectional power coupler : Coupling factor 49 dB typ.
  • Power coupling connector : Type N fem. (front or rear panel)
  • Estimated output power losses due to the coupler : 0.5 dB * => take account these power losses for the min output power

Ti potrebbe interessare…